Cut Edge Corrosion Treatment Broxburn
Cut edge corrosion develops where factory coatings terminate at cut edges, laps or fixings. Once coating lifts, steel oxidises and moisture tracks into joints. We stop the process, seal the paths and protect the edge with durable coatings.
Common Warning Signs
- Feathered or lifting coatings at edges and lap lines
- Rust streaks below joints or around bolt heads
- Pinholes, small gaps or damp insulation under laps
- Water ingress during wind-driven rain events
Our Method
- Assessment: Identify delamination, corrosion spots and moisture routes; plan access and safety.
- Prep & Edge Stabilisation: Mechanically remove failed coating; treat rust; degrease to a sound edge.
- Priming: Apply compatible metal primer to prepared areas for adhesion and protection.
- Lap Sealing: Tool elastomeric sealant into side/end laps, fixings and penetrations to specified depth/width.
- Protective Coatings: Install UV-stable topcoats with returns beyond lap edges (typically ≥50 mm); QA and clean-down.
If advanced section loss is present, selective sheet replacement may be advised after survey.
Why Choose Riolett Services
- Experienced crews with RAMS/COSHH and clear QA
- Night/weekend programmes to keep tenants operational
- Neat detailing at trims, laps and fixings
- Manufacturer-aligned specs with written guarantees
Cut Edge Corrosion — FAQs
Recent Work Near Broxburn
- Cold Chain — Hygiene Spec — laps, trims, bolt caps; evening shift. Result: airtight seals; tidy detailing.
- Trade Estate — Roof Laps — end laps; rust spots; fixings; night works. Result: watertight laps; colour-consistent.
- Retail Terrace — Edge Recovery — cut edges, end laps, bolt heads; night works. Result: sealed joints; neat topcoat.
- Fulfilment Hub — Lap Sealing — side laps & penetrations; 2 days + cure. Result: reduced ingress; uniform sheen.
- Industrial Bay — Corrosion Halt — delamination removal; prime & seal; phased access. Result: stable substrate; crisp lines.
Map — Projects Around Broxburn
See where we’ve been working in Broxburn.
Out-of-hours programmes available across Broxburn.
What Clients Say
Professional team, on time and communicative. Handed back clean.
Ingress stopped at end laps. Before/after photos were helpful.
Good value and a consistent finish across elevations.
Clear diagnosis and methodical prep. The laps are sealed and tidy.
Worked overnight and kept access open. Finish looks great.
Neat seal widths and crisp topcoat—exactly as specified.
Contact & Coverage
Riolett Services
Tel: 07538 489392
Service area: Broxburn and nearby locations.
Related services: Cladding Repairs • Cladding Spraying